Automatic oil press
    When the automatic oil press is running, the processed oil enters the press chamber from the hopper. By pressing the screw, the material embryo is continuously pushed inward for pressing. Because the material embryo is carried out in a moving state in the press chamber of the oil press, under the condition of high pressure in the press chamber, a large frictional resistance is generated between the material embryo and the screw snail, the material embryo and the press chamber. It can cause friction between the raw materials and micro-materials, causing relative movement.
     As the diameter of the root of the fully-automatic oil press is gradually increasing, and the pitch is gradually decreasing, when the pressing screw rotates, the thread can advance forward and turn outward, and it is close to the pressing screw. The material layer on the thread surface also rotates with the press shaft. In this way, each preform particle in the press chamber does not move at the same speed and in the same direction, but there is relative movement between the particles.
    The heat generated by the friction also meets the necessary heat for the operation of the oil pressing process, which helps to promote the thermal denaturation of the protein in the material embryo, destroys the colloid, increases the plasticity, and also reduces the viscosity and easy to precipitate oil. The oil output rate of the oil press is improved, so that the oil in the material is squeezed out and flows out from the gap between the row and the row.
    Fully automatic oil press, saving labor and low labor intensity.
    There are many types of automatic oil presses: YYZ400 oil press, YYZ390 oil press, YYZ280 oil press, YYS280 double screw cold press, ZYS260 double screw cold press, LZY204 double screw Cold press, LZY125 double spiral cold press, 204 oil press, 202 oil press, 200 oil press;

Output 10 tons--120 tons
Power 4KW-185KW
Prices start at $ 4,000

Automatic oil press

Automatic oil press